Vectoflow | Authorized U.S. Distributor
Customizable Flow Probes for Demanding Test Environments
K-Tec Systems is an authorized U.S. distributor for Vectoflow, supplying application-specific flow measurement probes for aerospace, automotive, turbomachinery and research testing.
Application-Specific Probes, Built to Order
Vectoflow is a flow measurement company based in Gilching, Germany. It designs and builds customizable pressure and temperature probes, including probes produced by 3D printing, and air data systems.
Because each probe is built for a specific test article, geometry, length and mounting can be matched to your application rather than selected from a fixed catalog. Vectoflow calibrates its multi-hole probes in its own wind tunnel.
K-Tec Systems supplies these probes in the United States, quotes them from your drawing or test requirements, and supports them with thermocouples, RTDs and cabling built in Ferndale, Michigan.
At a Glance
- Authorized U.S. distributor
- Probes built to your geometry and mounting
- Pressure and temperature probe options
- Multi-hole probes calibrated in the manufacturer’s wind tunnel
- U.S. quoting and application support
Vectoflow Probes
Specifications, ranges and lead times are confirmed at quotation. Contact us with your flow conditions and mounting requirements.
Kiel Pressure Probes
Total pressure measurement with low sensitivity to flow angle, for wind tunnel, engine and vehicle testing.
View Kiel Pressure Probes
Kiel Temperature Probes
Total temperature measurement with a Kiel-style shield, with thermocouple or resistance sensor options.
View Kiel Temperature Probes
14-Hole Omnidirectional Probes
Three-dimensional flow vector measurement over very wide flow angles, including unknown and reversing flow.
View 14-Hole Omnidirectional Probes
Multi-Hole Probes
3-, 5- and 14-hole probes for flow angle, total and static pressure, and velocity.
View Multi-Hole Probes
Smart 5-Hole Probes (iProbe)
Plug-and-play 5-hole probes with onboard processing and USB output for velocity, flow angle, pressure and temperature.
View Smart 5-Hole Probes (iProbe)
Smart Omnidirectional Probes (Omni-iProbe)
Plug-and-play 14-hole probes with onboard processing, for angle of attack and velocity when flow direction is unknown.
View Smart Omnidirectional Probes (Omni-iProbe)
Radiator Probes
Total pressure and mass flow distribution through a radiator, with low blockage.
View Radiator ProbesCombined Flow and Temperature Measurement
K-Tec Systems builds the sensing and cabling around the probe, so one U.S. team can support the whole measurement chain, from thermocouples and RTDs to wire harnesses.
Probe-Integrated Thermocouples
K-Tec Systems builds thermocouple assemblies in Ferndale, Michigan, so pressure and temperature can be measured at the same point in the flow.
Custom RTD Integration
RTD sensing elements built to your mounting and temperature range, supplied alongside the probe.
Wire Harnesses and Cabling
Instrumentation cabling and harnesses made to your test article, from the sensor to the data acquisition system.
U.S. Application Support
One U.S. team to review your test, recommend a configuration, quote it and support it after delivery.
Where These Probes Are Applied
Aerospace
Engine, compressor and airframe testing, wind tunnel and flight test.
Automotive
Vehicle aerodynamics, underhood and cooling airflow, and powertrain development.
Turbomachinery
Compressor, turbine and fan test rigs where flow angle and total conditions drive performance.
Wind Energy and R&D
Rotor and blade aerodynamics, and laboratory flow research.
Related Products
Wire Harnesses
Instrumentation harnesses and cabling built to your test article, from sensor to data acquisition.
View wire harnessesRequest a Quote or Application Review
K-Tec Systems is an authorized U.S. distributor for Vectoflow. We provide U.S. sales, application support and order coordination for Vectoflow flow probes. Contact us to discuss your test requirements.
Contact K-Tec Systems