Fluid Measurement Probes

Kiel Temperature Probes

Total temperature measurement that holds across flow angles, with thermocouple or resistance sensing.

Kiel Temperature Probes

Total Temperature in Flow That Does Not Arrive Head-On

A Kiel temperature probe uses a shrouded head, in the same way a Kiel pressure probe does, so the total temperature reading stays valid when the flow does not arrive head-on. Heads are available in tip diameters from 1.6 mm for installations with limited space.

Sensing options include thermocouples and resistance sensors. K-Tec Systems builds custom thermocouples and RTDs in Ferndale, Michigan, so sensor type, calibration requirements and cabling can be reviewed with one U.S. team that also handles quoting and order coordination.

Kiel temperature probes in four sizes

At a Glance

  • Flow angle up to ±50°
  • Tip diameter from 1.6 mm
  • Thermocouple or resistance sensing
  • Stainless steel, titanium or Inconel, to 800°C
Specifications

Kiel Temperature Probes Specifications

Manufacturer specifications for standard Kiel temperature probe configurations. Extended-range and custom options, material and lead time are confirmed at quotation.

MeasurementTotal temperature
Flow angleUp to ±50°
Maximum temperature800°C
Minimum diameter1.6 mm
Maximum length100 mm in one part; longer in multi-part designs
Speed range3 to more than 343 m/s
Sensor optionsThermocouple and resistance sensors
MaterialsStainless steel, titanium or Inconel
Accuracy and response timeSpecified at quotation for the selected sensor
Why K-Tec Systems

More Than a Probe Supplier

K-Tec Systems manufactures the sensing and cabling around the probe in Ferndale, Michigan, so one U.S. team can support the whole measurement chain, from thermocouples and RTDs to wire harnesses.

Manufactured and supported in the U.S.

K-Tec Systems builds custom thermocouples, RTDs, wire harnesses and test stands at our Ferndale, Michigan, facility. The probe, the temperature sensing and the cabling can be specified together, with one U.S. team behind the order.

Flow and temperature at the same point

K-Tec thermocouples and RTDs can be integrated into compatible probe designs, so total pressure and temperature are measured at the same location.

Registered for government and defense work

CAGE Code 4W0S0. WBENC and WOSB certified woman-owned small business. CMMC Level 2.

Thermocouples produced to ISO/IEC 17025 standards

Thermocouples for your test article are produced to ISO/IEC 17025 standards at K-Tec Systems.

Applications

Where Kiel Temperature Probes Are Used

Engine and turbomachinery testing

Total temperature in ducts and inlets where flow angle varies.

Wind tunnel and flow-field work

Compact heads for temperature mapping alongside total pressure.

Vehicle thermal testing

Air temperature measurement in cooling and intake flows.

FAQ

Kiel Temperature Probes: Frequently Asked Questions

What is total temperature?

Total temperature is the temperature the flow would reach if it were brought to rest. In moving flow, a bare sensor reads below it, which is why a shrouded head is used to measure it.

Why use a Kiel head for temperature?

The shroud keeps the reading valid when the flow arrives at an angle to the probe axis, up to ±50°, where an open sensor would read incorrectly.

Which sensors are available?

Thermocouples and resistance sensors. K-Tec Systems can review the sensor type, accuracy requirement, calibration and cabling for your application.

What temperature, size and speed ranges are available?

Operation to 800°C, tip diameters from 1.6 mm, lengths to 100 mm in one part, and speeds from 3 to more than 343 m/s. Longer lengths are possible with multi-part designs.

Can temperature and pressure be measured at the same point?

Kiel pressure probes and Kiel temperature probes use the same shrouded-head approach, and both can be supplied individually or in custom arrays. Our team can review a combined layout for your test.

How do I request a quote?

Call 248-414-4100 or submit the request form below with your temperature range, flow speed and mounting requirements.

Not sure which probe fits your test? See the full probe range or call 248-414-4100.

Related Products

Other Probe Types

All probes are supplied in the U.S. by K-Tec Systems. Scroll or use the arrows to see every probe type, or visit the fluid measurement probes overview.

Kiel probe

Kiel Probes

Total pressure to ±0.1% at flow angles up to ±50°.

View Kiel Probes
5-hole probe

5-Hole Probes

Total and static pressure plus yaw and pitch, to ±45°.

View 5-Hole Probes
Yaw pitot probe

Yaw Pitots

Dynamic pressure and wind yaw angle in one instrument, to ±30°.

View Yaw Pitots
Kiel rake

Kiel Rakes

Multi-point total pressure, quoted from your drawing.

View Kiel Rakes
14-hole omnidirectional probe with spherical tip

Omnidirectional Probes

14-hole probes for flow angles to ±155°.

View Omnidirectional Probes
Radiator probe with Kiel head for total pressure and mass flow measurement

Radiator Probes

Total pressure and mass flow through a radiator.

View Radiator Probes
Smart 5-hole probe with L-shaped tip

Smart 5-Hole Probes

USB probes with onboard processing for velocity and flow angle.

View Smart 5-Hole Probes
Smart omnidirectional probe

Smart Omnidirectional Probes

USB 14-hole probes for angle of attack over ±160°.

View Smart Omnidirectional Probes
Digital 7-hole probe

Digital 7-Hole Probes

Self-contained probes measuring three velocity components, with fast-response and miniature options.

View Digital 7-Hole Probes
Digital pitot probe

Digital Pitot Probes

Pitot-static probes with onboard sensors and USB output, in ranges from 0 to 15 m/s up to 0 to 110 m/s.

View Digital Pitot Probes

Micro Air Data Probes

Compact probes reporting velocity, static pressure, altitude, humidity and temperature over RS-485.

View Micro Air Data Probes
Digital 24-channel rake

Digital 24-Channel Rakes

A self-contained rake with 24 simultaneous pressure channels and interchangeable stings.

View Digital 24-Channel Rakes
13 probe types

Request a Quote or Application Review

K-Tec Systems provides U.S. sales, application support and order coordination for Kiel Temperature Probes. Contact us to discuss your test requirements.

Contact K-Tec Systems